The values received from Modbus become available to be read by the KNX system and vice-versa. There are two different versions of IntesisBox® - KNX Modbus RTU master with different capacity every one of them: Basic version with capacity of 500 points and up to 254 slave devices. Also, listen for any KNX telegram related to the internal points configured in it and acts accordingly to the configuration of the related point.įrom the Modbus system point of view, after the start-up process, the gateway listens for any read or write request, and serves any read request or performs any writing request of its internal points received from Modbus system. With the standard installation of LinkBoxMB, a Demo project for integration of several MHI indoor units is also installed. The table above shows the capacity for the top model (with maximum capacity). The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of LonWorks devices from a KNX installation. #Intesisbox modbus server knx softwareThis useful feature allows actions on the same internal point from multiple KNX group addresses.The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of KNX installations from a Modbus BMS, SCADA, PLC or any other device working as a Modbus Master.įrom the KNX system point of view, in the start-up process of the gateway and also after a detection of a KNX bus reset, the gateway polls the KNX signals configured to be updated in this situation and maintain the received values in memory to be served to the Modbus system when requested. IntesisBox Modbus Server series are configured using LinkBoxMB, a software tool for WindowsTM supplied along with the purchase of IntesisBox® with no additional cost. 14 Modbus addresses Number of variables per outdoor unit 9 Modbus addresses Maximum number of variables 1.937 Modbus addresses There are three different models of IntesisBox Modbus Server SAMSUNG AC each with different capacity. Données techniques version anglaise IntesisBox Modbus Server ME G50 Voir tous les modèles inclus dans ce document 6. To allow read requests, to allow write requests, to automatically send a write request to the KNX bus when its value changes, and to send a read request to the KNX bus when IntesisBox starts-up or after a bus reset.įor each point, one main group address and different listening group addresses can be defined. Données techniques version anglaise IntesisBox ME-AC-KNX-1 Voir tous les modèles inclus dans ce document 5. The aim of this integration is to make accessible KNX. Specially designed, in collaboration with several manufacturers like Mitsubishi Electric, Daikin, Samsung, Fujitsu to allow supervision and bidirectional control of all the parameters and. Integrate any KNX device or installation, with a Modbus BMS or any Modbus TCP or Modbus RTU controller. Any point in IntesisBox can be configured individually for different functionality. IntesisBox Modbus gateways have been specially designed to allow supervision and bidirectional control of all the parameters and functionality of systems and equipment with KNX, MBUS, BACnet/IP, BACnet MSTP, LonWorks, and DALI installations and Atersa or Fidelio systems from Modbus installations. The IntesisBox's KNX EIB interface connects directly to the EIB bus and is opto-isolated from the rest of the internal electronics. #Intesisbox modbus server knx fullOn the KNX side, IntesisBox simulates a KNX device and acts as if it was one more device into the KNX system. From now on, and with the aim of easy the read of this document, the abbreviation 'IntesisBox' is used instead of the full name IntesisBox®-Modbus Server LON. Points of Modbus TCP devices can be read/written from KNX. Modbus interface of IntesisBox supports reading of other Modbus devices by continuous polling them. IntesisBox is a Modbus TCP client device allowing to read/write points of other Modbus TPC Server device(s) connected to a Modbus TCP network, and offering these point's values through its KNX/EIB interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |